welcome to Stainless-Steel-Rails .co.uk
Cherished Traditional Albert Heated Towel Rail 1 1500mm (H) x 450mm (W)
However if you are to use the towel warmer in
full power even in summer, you are then advised to select the heating element
whose strength is equal or close to the heat output that the towel warmer
produces when it is connected to the central heating system.
For dual use installations you will need one angled and one straight type of
valves. These valves are listed on our website as "Pair of Mixed Chrome
Valves for Dual Use". Tee pipe is also needed for it makes it possible for
both the electric element and the valve to be fitted into the towel warmer
through the same entry point.
Which heating element is best for your towel
warmer is determined by the heat output that the towel warmer produces when it
is connected to the central heating system. You can find this figure next to the
picture of the product. For instance, the 400/1150mm Chrome Curved/Flat towel
warmers give 2142 BTU / 628 Watt heat output when they are connected to the hot
water system. Therefore the matching heating element for the 400/1150mm Chrome
Curved/Flat Electric Towel Warmers is 600 Watt one.
The blanking plug will be used to blank off one of the bottom entry points into
the towel warmer that will only be used to empty the water inside every 5-6
months.