|
Stainless Steel Heated Towel Warmer Maxi Flat
Product Features
-
1300mm High X 520mm Wide
-
Output Delta T 50k = 700 watts (2382 BTU's)
-
Tapping centres: 490mm
-
Wall to front face of rad: 85mm
-
Wall to centre inlet / outlet: 70mm
Product Characteristics
· It do not corrode or flake
· It can be used on open or closed systems
· These rails are pressure tested with air to 10 bars under water
· They have two easily accessible bleed valves
· They are fitted with 1/2" BSP sockets
· Each one has long mounts can be supplied to give an additional 40mm clearance from the wall
When you order a rail and element together the correct sized element is supplied.
Please add an element to your shopping basket to make the rail dual fuel, which makes the rail work in the summer as well, so you can dry your towels all year around.
From our point of view, this is a must have when buying the rail for bathroom use.
Note: The elements are supplied with a tee to the finish of the rail.
Model Selection Reckoner
To identify the model with the most suitable heat output for your bathroom (linear measurements in feet)
Step 1: Multiply room length x room width x room height = room volume (cu ft)
Step 2: Multiply room volume as calculated in Step 1 by 5. This figure gives a rule of thumb guide to the heat output (in BTU's) required for the bathroom.
Please click on the links below to download Product specification brochures for this product
 Download PDF format
 Download MS Word format
Get FREE Adobe Reader
|
Shopping Cart - 0 item(s)
