| Stainless Steel Baby Towel Rail Flat Tube Radiator
This rail is designed for central heating systems only
Product Specifications
- Size: 460mm Hight X 500mm Wide
- Wall To Front Face: 60mm / 80mm
- Pipe Centures: 468mm
- BTU: 789Watts: 232
Product Informations
- They do not corrode or flake
- They can be used on open or closed systems
- They are pressure tested with air to 10 bars under water
- There are easily accessible bleed valves
- They are fitted with 1/2" BSP sockets
Model Selection Reckoner
To identify the model with the most suitable heat output for your bathroom (linear measurements in feet)
Step 1: Multiply room length x room width x room height = room volume (cu ft)
Step 2: Multiply room volume as calculated in Step 1 by 5. This figure gives a rule of thumb guide to the heat output (in BTU's) required for the bathroom.
Why Stainless Steel and not Chrome
-
Stainless steel by its nature will not corrode or flake, it is also easy to clean and totally hygienic with no known health risks, thus it has been used in the food industry for many years.
-
Stainless steel is produced from over 90% recycled metal, manufactured environmentally and is 100% recyclable itself.
-
Sussex Range radiators will last a lifetime, manufactured from 304 (catering grade) stainless steel with 316 (marine grade) stainless steel welds.
-
Small marks or scratches can be polished out so they will always look great, these stunning durable radiators are the best heating choice for your home
Materials of Construction
-
All heated towel rails are constructed from 100% stainless steel including the brackets.
-
The heated stainless steel towel rail can be cleaned using any available stainless steel cleaning product, and polished with a soft cloth.
-
Small scratches and marks can be removed using metal polishes.
Central Heating
-
Centre pipe dimensions are as illustrated on the table below.
-
All Models are constructed from 100% stainless steel thus are suitable for any plumbing system including open/hot water systems.
-
All rails/radiators are pressure tested to 12 bar at two separate stages during production.
-
All rails/radiators have been fitted with half inch BSP female tapings.
-
BTU/Watt output figures quoted on all our products are based on ΔT=60K.
-
Please consult a plumber or a heating engineer to accurately calculate the output needed for your project.
-
Important! We cannot offer our guarantee on open/hot water system use when a salt based water softener is being used.
-
We recommend that all plumbing work is carried out by a qualified plumber.
Dual Fuel Kits
-
These allow you to heat your centrally heated towel radiator electrically when the heating is turned off.
-
Dual fuel kits comprise of an electric element and a chrome plated T piece which allows an element and central heating valve to be connected to the same side of the towel radiator.
-
All towel radiators have been designed to allow an element to be inserted on the right hand side of the radiator, although a left hand option is available on request.
Guarantee
-
25 year guarantee against manufacturing defects for all towel rails and radiators, proof of purchase is required for a replacement unit, guarantee does not extend to fitting costs and delivery charges.
-
Electric elements have a one year guarantee.
-
Please note we cannot offer our guarantee on open/hot water system use when a salt based water softener is being used. |
Shopping Cart - 0 item(s)
