|
Electric only Stainless Steel Heated Towel Warmer Midi Wide
Product Features
Product Characteristics
- It does not corrode or flake
- It can be used on open or closed systems
- These rails are pressure tested with air to 10 bars under water
- They have two easily accessible bleed valves
- They are fitted with 1/2" BSP sockets
- Each one has long mounts can be supplied to give an additional 40mm clearance from the wall
Please note that this picture is an example. Your rail will not have valves supplied as this is an electric only version.
We also do dual fuel if needed, which is electric and central heating.
When you order a rail and element together the correct sized element is supplied.
Please add an element to your shopping basket to make the rail dual fuel, which makes the rail work in the summer as well, so you can dry your towels all year around.
From our point of view, this is a must have when buying the rail for bathroom use.
Please note the elements are supplied with a tee to the finish of the rail.
Another good product from www.tradeplumbing.co.uk
Model Selection Reckoner
To identify the model with the most suitable heat output for your bathroom (linear measurements in feet)
Step 1: Multiply room length x room width x room height = room volume (cu ft)
Step 2: Multiply room volume as calculated in Step 1 by 5. This figure gives a rule of thumb guide to the heat output (in BTU's) required for the bathroom.
The Characteristics of Stainless Steel Rails
When fitting these rails you will have to use a switched spur, not a plug, as it dose not conform with UK regulation,If you are going to be using the rail in the bathroom. A rail is a separate entity to your system, but can be connected to the heating system at a later date by adding a set of valves if needed.
With these rails the best thing to use when requiring control over them is a time switch. If they are thermostatic controlled, they will be on all day and will increase you fuel bill. So it would make more sense to have the rail on in the morning and in the evening when youre using the room.
The electric rails we sell are filled with a special liquid and the rails are distributed to a company (In Essex) for this to be completed. We no longer fill the rails with oil as the EU has set new legislation on the dumping of oil. We do not install the elements as we have had too many items being damaged by the courier companies.
Please note all instructions illustrate on how to screw the element in are supplied. The element may be installed either side to suit your needs according to which side the power source originates.
Delivery Terms
Prices do Inc VAT. Delivery will be normally 3 7 working days. We will try our best to get this rail to you ASAP; but as we rely on couriers, this is not always possible as they can take 2 days, even though our items by next day & is £15.
If you need any more questions answered then please do not hesitate to email us.
Please click on the links below to
download Product specification brochures for this product
 Download PDF
format
 Download MS
Word format
Get FREE Adobe Reader
|
Shopping Cart - 0 item(s)
