• 600mm High X 782mm Length
• 600mm High 2 Columns 17 Sections White
• Non Condensing Boiler Output based DT60ºC 3149 BTU'S  923 Watts
• Condensing Boiler Output based DT50ºC 2506 BTU'S  734 Watts

• Extremely elegant, perfectly smooth, laser-welded structure. • 2 to 6 column radiators, in heights from300 - 2,000mm •2-stage painted, durable and non-corrosive finish. • Wide range of colours available by special order. • Supplied pre-welded and ready for installation. Delivered in sets • of 2 to 30 sections, in length from 92 - 1380mm. Each • section has a nominal width of 46mm. • Special plugs have been designed and patented to blend with • the smooth curves of Tubolaser. • Supplied with 1" fittings. • Maximum operating pressures are 12 bar for 2/3/4 column • radiators, 8 bar for 5 columns and 6 bar for 6. • All heat outputs shown derive from tests and approvals to • EN442, based on an average water temperature of 80°C and • a room temperature of 20°C. • Fully guaranteed for 5 years from all defects caused by faulty • materials or workmanship.

Tubular Steel Radiators 

For the architect and the interior designer, the radiator has always been a problem. The product’s inherent nature, its appearance, shape, size and colour limitations have, invariably, meant that creative compromise has been necessary.

Rarely could a room be designed in which aesthetics and heating requirements live together really perfectly. There was always a degree of sacrifice necessary on one side of the other.

With Tubular Steel Radiators, Biasi have created a radiator concept that delivers the best of all possible worlds.

Here is a radical range of radiators that not only sets new standards in manufacturing excellence and performance but also is capable of actually enhancing the design process by virtue of appearance and versatility - and that applies anywhere from homes to sports complexes, from public buildings to community centres.

Important features of Steel Tubular Rails

The enhancement of aesthetics any room

Biasi Tubular Steel Radiators are little short of individual works of art. These are radiators so attractive that they can become, effectively, integral elements within the whole interior design process, even driving that creative process.

The beauty of these radiators comes from the fact that they are manufactured using laser welding, the only technology that guarantees maximum precision, absolute cleanliness and a perfectly smooth finish without a trace of a weld joint in the

finished product.

Connections & Dimensions

All radiators are supplied with 1" left and right hand threaded tapings suitable for 1/2" B.S.P reducers (supplied). The radiator is manufactured with bottom, opposite end connections. Plug and vent supplied.

Operating Pressures

Maximum operating pressure is 12 bar for 2,3 & 4 column radiators.  

Sections

Radiator sections are supplied assembled ready for installation. Each section has a nominal length of 46mm (+/- 2mm).

Heat Output

The heat output figures quoted have been derived from tests and approvals to EN442.

Finish & Packaging

All radiators are finished in a superior white gloss RAL 9010 and individually packaged, being wrapped in heat shrink polythene film and double layered cardboard to prevent against damage and scratches in transit.

Guarantee

ALL DIMENSIONS QUOTED ARE ± 2mm

Column B1 & C1 = radiator on mounting nearest to wall

Column B2 & C2 = radiator on mounting furthest from the wall.

Wall Brackets

There are two wall brackets kits supplied as standard with all radiators and the contents of each kit are shown below. These are sufficient to support the combined weight of the radiator and water content. However consideration should be given to the radiator location, site conditions & wall construction, to determine what extra (if any) provisions are to be made. Optional Floor Mounts are available, details and prices are shown below.

Floor Mounts